{"id":14777,"date":"2025-12-31T07:13:29","date_gmt":"2025-12-31T07:13:29","guid":{"rendered":"https:\/\/www.air-classifier-mill.com\/?p=14777"},"modified":"2025-12-31T07:13:31","modified_gmt":"2025-12-31T07:13:31","slug":"how-does-an-air-classifier-mill-enable-non-destructive-grinding-of-porous-carbon","status":"publish","type":"post","link":"https:\/\/www.air-classifier-mill.com\/fr\/how-does-an-air-classifier-mill-enable-non-destructive-grinding-of-porous-carbon\/","title":{"rendered":"Comment un broyeur \u00e0 classification pneumatique permet-il un broyage \u00ab non destructif \u00bb du carbone poreux ?"},"content":{"rendered":"

Porous carbon materials, such as activated carbon and pyrolytic carbon black, are well known for their highly developed pore structures. These pores provide an enormous specific surface area. They allow porous carbon to play a critical role in adsorption, catalysis, energy storage, and environmental purification. However, during processing\u2014especially at the ultrafine grinding stage\u2014preserving pore structure integrity has become a major industry challenge. This article examines whether ultrafine grinding damages pore structures. It also explains how an classifier mills achieve \u201cnon-destructive\u201d processing through innovative design. These grinding technologies help porous carbon transform from coarse raw materials into high-performance powders.<\/p>

\"Poudre<\/figure>

Potential Effects of Porous Carbon Ultrafine Grinding<\/a> on Pore Structure<\/h2>

Ultrafine grinding refers to reducing materials to the micron or even submicron scale (typically d97 < 10 \u03bcm). For porous carbon, the goal is to enhance specific surface area and dispersibility. However, the process may also damage pore structures. Traditional mechanical grinding methods, such as ball milling or hammer milling, involve intense mechanical impacts and friction. These forces can lead to pore collapse, blockage, or deformation.<\/p>

Studies show that mechanical grinding can indeed damage pore structures. For example, in the treatment of coal gasification fine slag (CGFS), mechanical grinding significantly alters pore morphology. It reduces macropore water content and disrupts the original pore network. As a result, the adsorption capacity is affected.<\/p>

Similarly, for coal particles, grinding densely impacts porous structures. It changes nitrogen and carbon dioxide adsorption behavior. Although adsorption may increase in newly opened pores, overall structural integrity is compromised.<\/p>

Ball mill is even more aggressive. It can transform the disordered porous structure of activated carbon into a graphitic structure and introduce oxygen atoms. While this may enhance certain properties (such as pseudocapacitance), it fundamentally alters the original pore architecture.<\/p>

However, not all ultrafine grinding inevitably destroys pore structures. The key lies in equipment selection and process optimization.Non-contact grinding methods, such as jet mills, rely on high-speed particle\u2013particle collisions. They avoid direct contact between mechanical components and the material. This design minimizes contamination and structural damage. In a porous carbon project in South Korea, jet milling achieved ultrafine particle sizes below 5 \u03bcm. More than 95% of the pore structure was retained. High-temperature oxidation was also avoided. This performance is attributed to the Joule\u2013Thomson cooling effect during gas expansion. The effect keeps the grinding chamber at a low temperature. It prevents oxidation and damage to the carbon structure. Therefore, whether ultrafine grinding damages pore structures depends on the method used. Conventional mechanical approaches are more destructive. Advanced jet or classifying technologies can achieve relatively \u201cnon-destructive\u201d processing.<\/p>

Principles of Air Classifier Mills<\/a> and Their \u201cNon-Destructive\u201d Advantages in Porous Carbon Processing<\/h3>
\"air<\/figure>

An air classifier mill integrates grinding and particle size classification in a single system and is widely used for low-density, ultrafine materials such as carbon black and porous carbon. Its core principle involves impact grinding by rotating elements (such as hammers or blades), combined with an internal dynamic air classifier that separates particles by size. Oversized particles are returned to the grinding zone for further processing, while qualified fine particles are discharged. This closed-loop design prevents overgrinding and ensures a narrow particle size distribution.<\/p>

In the \u201cnon-destructive\u201d processing of porous carbon, classifying mills perform particularly well. Taking the Mikro e-ACM air classifying mill as an example, this system is specifically designed for carbon black. Its internal geometry and components are modified, and ceramic or tungsten carbide materials are used to reduce contamination. Unlike standard ACM mills, it adopts an external coarse particle recycle system, in which oversized particles are circulated outside the mill and returned to the grinding chamber. This avoids internal recirculation that could cause particle flotation and excessive collisions. Such a design is especially suitable for low-density porous carbon, preventing particles from floating or clogging in the classification zone. Products are entrained in cooling, conveying, and classification airflow, with tip speeds up to 140 m\/s, achieving a fineness of d97 = 10 \u03bcm while maintaining low grit levels.<\/p>

This \u201cnon-destructive\u201d mechanism is reflected in several aspects:<\/h2>